服务热线: 025-86106162
二十年品牌  二十万学员的选择

SP ccna

日期: 2019-11-11
浏览次数: 11

CCIE Practical Exam Format

 

The 8 hours practical exam will assess candidate's skills through the entire network lifecycle of designing, deploying, operating and optimizing complex network scenarios.

 

The exam consists out of 2 modules that are fixed in time and will be delivered in a fixed sequence:

 

·        Module 1: Design (3 hours)

·        Module 2: Deploy, Operate and Optimize (5 hours)

 

Automation and Network Programmability skills, as per Exam Topics, are an integral part of both modules.

 

Candidates will be tested on varying technologies and solutions listed in the Exam Topics throughout both modules. While both modules independent from each other, there is a progressive storyline that will be built upon throughout the entire 8 hours lab practical exam. Candidates will not be able to navigate back-and-forward between modules.


SP ccna



Each module has both a minimum score and a pass score. Both minimum and pass scores are set on a per-module basis, based upon exam difficulty level.

 

·        The pass score corresponds with expert level competence.

·        The minimum score is the absolute minimum score expected from an expert level candidate.

 

To pass the exam, candidates need to score higher than the aggregated pass score of both modules and score higher than the minimim score set on each of the modules individually.


SP ccna


If candidates score less than the overall aggregated pass score of both modules OR score less than the minimum score set on 1 (or more) of the individual modules, they will fail the exam.

 

Upon passing the exam, candidates will not be provided any additional score details.

 

Candidates that fail the exam will be given a score report, indicating what module(s) they passed or failed. Additionally, candidates will be provided cumulative scoring percentages on a per domain level, across both modules.


上一篇:无下一篇:SP ccnp
News / 相关新闻 More
2019 - 11 - 11
2017 - 11 - 17
思科职业认证CCIE课程目标路由和交换领域的CCIE认证资格表示网络人士在不同的LAN、WAN接口和各种路由器、交换机的联网方面拥有专家级知识。R&S 领域的专家可以解决复杂的连接问题,利用技术解决方案提高带宽、缩短响应时间、最大限度地提高性能、加强安全性和支持全球性应用。考生应当能够安装、配置和维护LAN、WAN和拨号接入服务。方向:网络管理及实施,网络性能优化、安全设计职位:网络工程师,系统集成工程师,网络维护工程师能力:设定主干路由协议利用多层交换技术建立园区网络环境安装配置CISCO设备并进行故障诊断和排错薪水:平均年薪不低于15万人民币,Cisco认证被恰当地称为'获得高技术,高薪水的头等舱船票①充足课时;充足的课时保证学员彻底学懂学会;②免费重修:学员缺课或者学习效果不理想,可以免费重修,确保完全掌握;③自由实验:实验室免费开放,时间不限,不断提高动手操作水平;...
2017 - 11 - 17
CCNA课程目标    思科职业技能认证的初级认证思科认证网络支持工程师(CCNA)表示具备基本的和初步的网络知识。拥有CCNA认证的人士可以为小型网络(不超过100个节点)安装、配置和操作LAN、WAN和拨号接入服务,主要解决了网络的基本连通问题,具备初级网络工程师水平。通过CCNA课程的学习,您可以完成如下任务:1.在什么情况下应用集线器、交换机和路由器 2.利用Cisco IOS软件确认端口、协议、地址和可连接性3.根据要求互连交换机和路由器 4.配置交换机和路由器以支持LAN和WAN 服务5.设置IP子网以便于有效地管理网络6.通过配置访问列表来控制对网络段或网络资源的访问7.确认交换机、路由器及其配置的网络服务是按我们的预期在工作8.判断网络故障的原因并解决之9.对一些实际工程案例有一定的分析和解决能力学员要求计算机或相关通信专业,零基础或...
2017 - 11 - 16
思科职业认证CCIE课时安排
  • 微信扫一扫
  • 咨询电话:
  • 025-86106162
    18936898390


  • 一键加QQ群:
  • 思琦网络CCIE&HCIE群5
  • 销售咨询:蒋晗
  • QQ:2461907609 微信号:sqnjkf
    高级讲师:樊琦
    QQ:3052350132
    微信号:18936898390
    QQ:2461907609
  • 公司地址:
  • 江苏省南京市白下区洪武路38号正洪大厦19层 (南京总部)

    安徽省芜湖市鸠江区东部星城西区商务楼74-8室 (芜湖分部)

    重庆市高新区科园一路210号渝高广场D座10层 (重庆分部)

siqiwangluo.com  ©2017-11- 22 南京思琦网络科技有限公司 
犀牛云提供企业云服务
思琦在线咨询